Testing

  • Solteq Roof Tiles meet or exceed all IBC International Building Codes & IEC International Energy Codes & Certifications.
  • Solteq Roof Tile Certification & Listings are pending in North America as follows;

 

Fire
ASTM E 108
UL 790
Class A or C Burning brand, intermittent flame, and spread of flame.
UL 2218 Impact Class 4 Two-inch steel ball weighing 1.2 lbs dropped from 20 feet
ASTM D3161 same as
UL 997 Wind Uplift
UL 580
Tolerated – speed @ 110mph
Accelerated Weathering ASTM 4798 Indistinguishable color change. No appreciable change in tensile strength.
Freeze-thaw ICC-ES Acceptance Criteria ACO7 section 4.9 No indication of spalling, crazing, cracking, or other deleterious surface changes.
ICC-ES AC07
Section 4.4 Loads
Tolerated an applied load of 200 lbs.
ASTM D 471 Water Absorption Virtually no water absorption.
ASTM D 3462 Nail Pull Through 140 lbs. Resistance at 32 F
168 lbs. Resistance at 72 F
ASTM G21 Fungus (algae) Does not propagate fungus growth
ASTM D 638
Tensile Strength
No meaningful reduction of strength.
TAS-100 The system tolerates 110 MPH blowing simulated rainwater
ASTM D6083 & D6694. Accelerated Aging /Sustainability
50 plus yrs.

Testing / Accreditations 

UNI 9177 {best} Fire Class A / rating 1
Hail – IEC 61215, Class 3 = 1.75″ diameter, 44-gram ice ball, @ 60 mph impact resistance
Wind Load DIN 1055-4 – 200 mph
IEC EN 61730, – Harmonized. [not UL listed]
IEC EN 61215 weather testing including temperature cycling
IEC EN 61701 – Salt corrosion tested
CEN/TR 15601 – wind driven rain tested
CE Certificate – EU safety standards and efficiency